Table of Contents
Advertisement
Dashboard Instruments and Controls
the previous screen. Most of the
messages of this type are then
stored (as long as the condition that
activated them remains active) and
can be reviewed from the "Stored
Messages" main menu item.
Example of this message type is the
one shown in the picture.
4
• Unstored Messages
This message type is displayed until
the condition that activated the
message is cleared (see example in
picture).
160
• Unstored Messages with Ignition
Switch in RUN
This message type is displayed until
the ignition switch is in RUN position.
An example of this message type is
the one shown in picture.
• Five-Second Unstored Messages
When appropriate conditions occur,
this type of message appears on the
main display area for five seconds
then returns to the previous screen.
• Navigation Messages
When the navigation menu is
enabled on the MTC+, information
pop-ups will be displayed while
changing direction or approaching a
turning point until the navigation
system requires its displaying, or until
a command is given via the buttons
on the steering wheel. On highway,
the first pop up will be displayed at
3.2 km (2 miles) from the turn, on
roadway, at 1.6 km (1 mile).
While approaching the turn, further
pop ups will be displayed starting at
400 m (437 yd) from the turning
point and the countdown to 0
meters.
While getting closer to a turn, the
sections referred to the distance
already travelled will switch off while
the ones referred to the distance yet
to be travelled will remain on.
Advertisement
Table of Contents
