Table of Contents
Advertisement
Dashboard Instruments and Controls
• Paired Phones
By selecting this feature you will be
4
notified which phones are combined
to the Phone/Bluetooth system.
For each option, you can also add
one or more devices and change the
PIN code of the device you wish to
connect. For further information,
see the "Maserati Touch Control Plus
(MTC+)" guide.
206
• Paired Audio Sources
By selecting this feature you will
be notified which audio source are
combined to the Phone/Bluetooth
system.
For each option, you can also add
a device and change the PIN code
of the device you wish to connect.
For further information, see the
"Maserati Touch Control Plus
(MTC+)" guide.
• Phone Pop-ups Displayed in Cluster
When this mode is selected a pop-
up message will appear in case of
incoming call. Information associated
to call in progress are available by
entering to the "Audio" menu using
the buttons on the steering wheel RH
side.
• Phone Connection Mode
This feature allows you to change
the phone connection mode from
"Settings" menu or from the phone
settings menu.
Selecting this feature accesses the
page where the current connection
mode is selected. The mode list
is configured according to the
connected projection device.
To activate a new connection mode
(example: "Charge Only") a pop-up
invites the user to disconnect and
reconnect the device cable to the USB
port and confirm the action.
NOTE:
On the Maserati website, at
www.maserati.com, or through the
Maserati Service Network you may
consult the list of telephones that are
compatible with the "Maserati Touch
Control Plus (MTC+)", and their level
of compatibility.
Radio Setup
Press the "Radio Setup" soft-key to set
some listening options.
• FM
By Selecting the FM type of
frequency you may listen to traffic
announcement, alternative frequency
information or tune to the regional
mode.
Advertisement
Table of Contents
