Mtc+ “Controls” Screen; Features Common To All Configurations; Privacy Lock - Maserati Levante 2019 Owner's Manual

MTC+ "Controls" Screen
Touch the "Controls" soft-key on the
lower part of the MTC+ display to turn
on/off some on-board devices and turn
on/off and adjust some driver assist
systems (ADAS).
Once you enter the "Controls" screen,
using the touch soft-keys or turn the
tune/scroll knob to scroll and change
settings of the features and press the
enter upper button to confirm the
selection.
Some of these devices or systems are
optional or for a specific model/version
and may not be available on your
vehicle.
The "Controls" screen is specific to
the vehicles that are not equipped
with driver assistance systems (Without
ADAS) and for those that have them
(With ADAS).
Without ADAS
With ADAS
Some features can be set only on or
off touching the corresponding soft-
key which will be highlighted with the
blue outline.
Other features can have one or
more instruction/setting pages
that are accessed by touching the
corresponding soft-key (example:

"Privacy Lock").

The ADAS features have two soft-keys:
the first changes the current setting on
or off, the second on the side shows
the current setting.
Touching this last soft-key you enter
the setting page in which all feature
options are visible and adjustable.
NOTE:
• For further details refer also to
the "Maserati Touch Control Plus
(MTC+)" guide.
Dashboard Instruments and Controls
• All settings must be edited with
ignition device set to RUN position.
• Some of the Customer programmable
features are optional or for a specific
model/version and may not be
available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
• Menu navigation indications refer
to the use of soft-keys on MTC+
display: the same operations can be
performed using the manual controls
on central console.
Features Common to All
Configurations
• Privacy Lock
The two modes of this feature allows
you to enter a 4-digit PIN code to
lock and unlock the glove box in the
passenger side of the dashboard and,
choosing "Valet Mode", to lock your
settings for listening and guidance.
See "Dashboard Compartments" in
this section for further details
• Start & Stop Off
This feature allows you to disable the
Start & Stop when frequent stops and
restarts of the engine may become
annoying.
4
193