Table of Contents
Advertisement
Driving
(Continued)
• In order to ensure proper operation,
the CC system has been designed
to shut down if multiple systems
are operated at the same time
(example: ACC and FCW). When
conditions so allow, the CC system
can be reactivated by pushing
the CC "ON/OFF" button or the
ACC Gap button (in the Optional
Configuration) and resetting the
desired vehicle set speed.
Displayed Information
CC conditions are displayed on
instrument cluster after selecting
"Driver Assist" menu (see paragraph
5
"TFT Display: Menus and Settings"
under "Instrument Cluster" in
section "Dashboard Instruments and
Controls").
Displayed information depends on
system status: ready, set, temporarily
cancelled or override.
Apart from the pop-up messages at
the centre of the display, CC system
status is represented by icons at the
top left. These icons remain displayed
even when you exit the "Driver Assist"
screen.
The CC screen can be displayed any
time driver changes system status
or settings. After 5 seconds of CC
280
inactivity, the display goes back to last
screen.
Activation
To turn the system on, push the
ON/OFF button or the ACC Gap
button for 2 seconds (in the Optional
Configuration). The
white light
with below 3 dashes on the instrument
cluster display will illuminate.
To turn the system off, push the
ON/OFF button a second time
or the ACC button (in the Optional
Configuration). The
white light
will turn off.
NOTE:
The CC system must be turned off
when not in use.
WARNING!
Never leave the electronic Cruise
Control system on when not in use.
You could accidentally set the system
or cause it to go faster than you want.
Always leave the system off when you
are not using it.
Speed Range of Use
Speed
km/h (mph)
Minimum
30 (18)
Engaged/activated
30 (18)
Maximum
210 (130)
Setting Desired Speed
Turn on the CC function. When the
vehicle has reached the desired speed
(in the example: 100 km/h), push
downward the multifunction switch
(SET -) and release.
The
green light with below the
desired speed will illuminate on the
instrument cluster display.
Advertisement
Table of Contents
