Table of Contents
Advertisement
Driving
"Setting Saved" Selection notification
appears as a popup for 2 seconds
then the display will show again the
modified function.
5
In order to disable the automatic
operation follow the same procedures
and select the other option.
266
CAUTION!
•
Under certain conditions when the
battery voltage is low, the electric
automatic parking brake system
may temporarily be deactivated for
safety reasons. Therefore, typically
upon starting the engine, when the
battery voltage drops, a message
may temporarily be displayed,
indicating that automatic operation
is temporarily disabled.
•
In case of repetitive requests to reset
the EPB through the messages shown
on the TFT display, please contact the
Service Network .
Failure Indication
In the event of electric parking brake
system failure, the warning light
on the display will light up and
the related message will show for 5
seconds.
WARNING!
In the event of an EPB failure, take
your vehicle to the nearest Service
Network Center as soon as possible.
Initialize the EPB System after Re-
connecting the Vehicle Battery
After the detachment and the
subsequent connection of the battery,
on the instrument cluster display the
warning light
will be illuminated.
To initialize the EPB system, lift,
release and lift again the lever located
behind the shift lever.
Emergency Disengagement
In case of brake lock with complete
electrical system failure, it is necessary
to force the electric actuator on the
rear calipers (see "Emergency Release
of the Parking Brake" chapter in
section "In an Emergency").
EPB Operation with
Overheated Brakes
Driving on mountain roads with steep
slopes or a sports use of the vehicle
could overheat the brake system
Advertisement
Table of Contents
