Table of Contents
Advertisement
Dashboard Instruments and Controls
• Fuel Economy Average in L/100km,
MPG (UK) or MPG (US)
Shows the average fuel economy
since the last reset.
Press the multifunction switch (
) for 1 second and release it to reset
the fuel economy average.
When the fuel economy is reset, the
display will read "Reset" or show
dashes for two seconds.
Then, the history information will
be erased, and the averaging will
4
continue from the last fuel average
reading before the reset.
Press and release the
return to the main menu.
6. TRIP
Press and release the switch in the
or
arrow directions until this menu
item is displayed.
164
For each of the "Trip A" and "Trip B"
sub-menus the screen will display the
following:
• "Distance" traveled in km or miles.
Shows the total covered distance
since the last reset.
• "Average" consumption in L/100km,
MPG (UK) or MPG (US). Shows the
average fuel consumption since the
last reset.
• "Average" speed in km/h or MPH.
Shows the average speed since the
last reset.
• "Elapsed Time". Shows the total
time of travel since the last reset in
button to
"hours:minutes: seconds." Elapsed
Time will increment when the
ignition switch is in the RUN or
START position.
Press the multifunction switch (
1 second and release to reset "Trip A"
or "Trip B".
"Trip B" is reset after each key on/key
off cycle.
Press and release the
return to the main menu.
7. START & STOP
Press and release the switch in the
or
arrow directions until this menu
item is displayed.
With the ignition device in RUN
position, the screen will display the
status of the function (see example
in picture). To change the status of
the function, please see chapter
"Automatic Start&Stop System" of
section "Driving".
8. AUDIO
Press and release the switch in the
or
arrow directions until this menu
) for
item is displayed.
button to
Advertisement
Table of Contents
