Maserati Levante 2019 Owner's Manual page 169

Press and release the switch (
select an item. The notification of
setting saved appears as a popup for 2
seconds, then the display will show the
last-modified item.
Press and release the button to
return to the "Screen Setup" submenu.
"Screen Setup" submenu parameters
set by the user as the ones to be
displayed are also indicated in the top
part of the MTC+ (see example in the
figures).
) to
As for the instruction line "MPH km/h
Display", you can either select to
display it in sector 6 or not ("Off"
option). In the latter case, the function
of changing units remains in any case
active.
If the "Main Menu Navigation" is set
to "On", navigation information will
be displayed in the main area of the
display only if a destination has been
set on the navigator of the MTC+. If
Dashboard Instruments and Controls
function is set to "Off", the navigation
information will not be displayed.
If the "Outline Colouring" is set to
"On", the TFT side edge of engine
temperature and fuel gauge indicators
will change color depending on the
selected Drive Mode:
• OFF ROAD: brown;
• I.C.E.: light blue;
• SPORT: green (example shown in
picture);
• CORSA (TROFEO version only):
golden.
If it is set to "Off", the color/Drive
Mode combination is not active and
the edges will remain "NORMAL"
Drive Mode color.
"Key-On Display" and "Key-Off
Display" items allow user to set display
during vehicle key-on and off.
"Key-On Display" is normally set to
"On". When entering the vehicle,
4
169