High Beams And Flashing - Maserati Levante 2019 Owner's Manual

Understanding the Vehicle
3
To activate lane change function, tap
the lever up or down once, without
moving beyond the detent. The turn
signals (right or left) will flash three
times then automatically turn off.
This function is useful when
overtaking or changing lanes.
NOTE:
• If either light remains on and
does not flash, or flashes at a fast
rate, check for a defective outside
light bulb. If an indicator on the
instrument cluster fails while moving
the lever, then the indicator bulb is
probably defective.
• The message that a turn signal is on
will appear in the instrument cluster
and a continuous chime will sound
if the vehicle is driven more than 1.6
km (1 mile) with either turn signal
on.
118

High Beams and Flashing

To switch on the high beams with
the light switch in headlamp
or "AUTO" position, shift the
multifunction lever onward. The blue
telltale will illuminate on the
tachometer.
By pulling the lever backward (toward
the steering wheel) you switch off the
high beams and switch on the low
beams.
You can signal another vehicle with
your headlights by lightly pulling the
multifunction lever toward you. This
will turn on the high beams headlights
until the lever is released.
Flashing occurs also with lights off if
the ignition switch is RUN position.
CAUTION!
The high beams can only be switched
on manually by pushing the
multifunction lever forward.
WARNING!
If the high beams have been switched
on, they will turn on automatically
every time the low beams are
switched on either manually or
automatically. We recommend
therefore that you switch them off