To adjust driver and passenger side
temperature and fan speed, climate
control panel features rocker switches
that can be pushed up to increase
temperature/speed, or down to
decrease them. When MTC+ is in any
mode other than "Climate", pressing
an air distribution or blower hard
control on the climate control panel
a small pop-up will appear for three
seconds above the "Climate" icon on
the main bar.
1. Climate control on/off
Once you enter the screen "Climate",
touch the soft-key indicated in picture
to switch the climate control on/off.
The "OFF" soft-key will appear in
place of "ON" when the A/C is on.
If the A/C system has been turned
off, temperature values in the upper
status bar will be obscured in all MTC+
modes.
NOTE:
For vehicles equipped with Remote
Start, the Air Conditioning System
will not function during Remote Start
operation if the climate control is left
in "OFF".
2. A/C
Touch the "A/C" soft-key to change
the current air conditioning setting;
the soft-key illuminates when the
A/C is on. Operating this function will
cause the automatic feature to switch
into manual mode and the "AUTO"
LED on the button and MTC+ soft-key
will turn off.
3. Driver temperature control
Dashboard Instruments and Controls
Provides the driver with independent
temperature control. Touch the blue
soft-key for cooler temperature.
Touch the red
soft-key for warmer
temperature. The driver's temperature
setting will be displayed on the MTC+
between the soft-key
temperature can also be adjusted by
touching and sliding the bar towards
soft-key
, to increase temperature,
or towards soft-keys
During this phase, a small pop-up on
the side will show the corresponding
temperature.
You can increase or decrease the
temperature using the rocker switch
on the climate control panel.
NOTE:
In "SYNC" mode, this control will also
automatically and simultaneously
adjust the passenger temperature.
4. Passenger temperature control
Provides the passenger with
independent temperature control.
Touch the
soft-key for cooler
temperature. Touch the
for warmer temperature. The
passenger's temperature setting will
be displayed on the MTC+ screen
between the soft-keys
and
. The
to decrease it.
4
soft-key
and
.
213