Changing Speed Setting; Temporary Deactivation; Driver Override; Resume Speed - Maserati Levante 2019 Owner's Manual

Table of Contents

Advertisement

Release the accelerator and the vehicle
will operate at the selected speed.
NOTE:
The vehicle should be traveling at a
steady speed and on level ground
before pushing the switch downward.
Pressing the
"ON/OFF" button or
the ACC Gap button for 2 seconds (in
the Optional Configuration) or moving
the ignition switch in OFF position
erases the set speed memory.

Changing Speed Setting

Pushing the multifunction switch
upward (RES +) or downward (SET
-) once, or by holding it down, will
enable to increase or decrease the
set speed by one unit (1 km/h or 1
mph). If the car is equipped with
ADAS Systems, the single press of the
multifunction switch will increase or
decrease the set speed of 1 km/h or
1 mph; a continuous pressure of the
same will increase or decrease the set
speed of 10 km/h or 5 mph.
Release the switch when the desired
speed is reached, and the new set
speed will be visualized below the
green light.
Each subsequent tap of the
multifunction switch will increase or
decrease the speed by 1 km/h or 1
mph.

Temporary Deactivation

A soft tap on the brake pedal, pressing
the multifunction switch (CANC), or
normal brake pressure while slowing
the vehicle will temporarily deactivate
the CC without erasing the set speed
memory. The
white light with
below the set speed will appear on the
display.

Driver Override

If the driver presses the accelerator
pedal while the CC is on, such as to
overtake another vehicle, and exceeds
the set speed limit, the system will
temporarily deactivate the CC. During
the event, the speed indication below
the green
light will be blinking.
When the accelerator pedal is
released, the vehicle will return to the
set speed and the
green light with
below the set speed with steady light
will be displayed.

Resume Speed

To resume a previously set speed, push
upward the multifunction switch
(RES +) and release. The
light with below the set speed will
illuminate on the instrument cluster.
Resume can be used at any speed
above 30 km/h (18 mph).
Driving
5
green
281

Advertisement

Table of Contents
loading

Table of Contents