Table of Contents
Advertisement
Understanding the Vehicle
3
Press the switch once and the mirrors
will fold in; press the switch a second
time to reset the mirrors to the
standard position.
There is a way to make external
mirrors automatically fold/unfold.
• If the function is available, it needs
to be activated by MTC+ (refer
to "MTC+ Settings" in section
"Dashboard Instruments and
Controls").
106
• If the mirrors are automatically
folded after the last lock action, then
they will automatically unfold when
the ignition device is set on ACC or
RUN position.
• If the mirrors were manually folded
by the switch on the driver's door
panel, before a lock action, they will
need to be manually unfolded to
reactivate the automatic function.
CAUTION!
Never retract or open the mirrors
manually: it could damage the power
mechanism.
Internal Rear-View Mirror
The position of internal rear-
view mirror can be manually
adjusted, and is endowed with an
accidentprevention release system
operating in the event of a collision.
Internal rear-view mirror is
electrochromic (for versions/markets
where provided): this glare function is
automatically deactivated in reverse to
ensure maximum visibility of obstacles.
CAUTION!
To avoid damage to the mirror during
cleaning, never spray any cleaning
solution directly onto the mirror. Apply
the solution onto a clean cloth and
wipe the mirror clean.
"Mirror Dimmer" Feature
The auto-dimming feature can be
disabled or re-enabled by pressing the
on/off button on the mirror base.
Typical case is at night when the
auto-dimming can be excessive (low
reflectance). Disabling this feature will
increase the reflectance of the internal
mirror, increasing visibility.
Advertisement
Table of Contents
