Mtc Settings - Maserati Ghibli 2016 Owner's Manual

Dashboard Instruments and Controls

MTC Settings

The MTC System uses a combination of
keys able to access and change the
customer programmable features.
Touch-screen keys are positioned on
the lower part of the MTC display
centrally of the dashboard.
There is a Scroll/Enter control knob
located on the right side of the MTC
display.
Turn the control knob to scroll through
menus and change settings (i.e., 30, 60,
4
90), press the button in the center of
the control knob one or more times to
select or change a setting (i.e., ON,
OFF).
NOTE:
For further details refer to the
Maserati Touch Control guide.
166
Customer Programmable
Features — MTC Settings
Press the Settings soft-key (or More
soft-key then Settings soft-key if
equipped - see alternate menu bar
image) to display the programmable
features menu.
Alternate menu bar
In this mode the MTC System allows
you to access following programmable
features (some of them are optional
and may not be available on your
vehicle): Display, Clock & Date, Safety
& Driving Assistance, Lights, Doors &
Locks, Auto-On Comfort & Remote
Start, Engine Off Options, Audio,
Phone/Bluetooth and SIRIUS XM Setup.
NOTE:
Only one touchscreen area or key may
be selected at a time.
To make a selection, and enter the
desired function, press the
corresponding soft-key on the menu
(the picture shown is "Doors and
Locks").
To scroll through the functions, move
the cursor up or down, or press the
arrow ▼ or ▲. Once the desired mode
is entered, press and release the
touch-screen area of the setting that
you wish to modify. The new setting
will be highlighted with one or more