Table of Contents
Advertisement
With ADAS
NOTE:
• All settings must be edited with
ignition device set to RUN position.
• Some of the Customer programmable
features are optional or for a specific
model/version and may not be
available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
• Menu navigation indications refer
to the use of soft-keys on MTC+
display: the same operations can be
performed using the manual controls
on central console.
To display the programmable
features menu on MTC+, you can
also touch
soft-key to view all
available applications and then select
"Settings".
In this mode the MTC+ System
allows you to access the following
programmable features (some of
them are optional or for a specific
model/version and may not be
available on your vehicle): Display,
Units, Voice Commands, Clock, Safety
& Driving Assistant, Lights, Doors &
Locks, Auto-On Comfort & Remote
Start, Engine Off Options, Suspension,
Audio, Phone/Bluetooth, Radio Setup,
Restore Settings and Clear Personal
Data.
To make a selection, and enter
the desired function, touch the
corresponding soft-key on the menu
(the picture shown is "Engine Off
Options").
Dashboard Instruments and Controls
To scroll through the functions, move
the cursor up or down, or touch the
arrow
or
. Once the desired
mode is entered, press and release the
touch screen area of the setting that
you wish to modify. The new setting
will be highlighted with one or more
boxes to indicate status or possible
variants of the function status. A check
mark in a box indicates the current
status of the function. Touch the check
mark to cancel, or the empty box to
insert the check mark, and change the
status of the function.
4
197
Advertisement
Table of Contents
