Table of Contents
Advertisement
• Completely fold down the rear seats
backrests by lifting the lever to
position 1 and hold it up.
• Release the lever when seatback is
against the seat: the control cable
will click into place and lock.
• In this position, push down on the
seatback of the long part (60): the
control cable will click into place and
lock.
Now that seatbacks are folded down,
boot floor and the back panels of
seatbacks will form a larger flat floor.
CAUTION!
Seatback rear panel is not suitable to
support heavy loads and metal objects
with protruding elements that might
scratch its surface. If necessary, protect
the seatback rear panel surface using
rigid panels.
Installing the Cargo Net for
Cargo Area
The Cargo Net can be installed to two
positions depending on the current
extension of the cargo area. When
only the boot cover is removed (see
previous paragraph), while backrests
are still vertical, the Cargo Net must
be installed immediately behind them
(position A ).
While, in case also backrests were
folded down, the Cargo Net must be
installed in a more forward position
behind the front seats (position B ).
Understanding the Vehicle
WARNING!
•
Before install the Cargo Net in the
more forward position make sure
that the backrests are locked in the
lowest position.
•
The Cargo Net must be properly
installed following the instructions in
this paragraph.
•
The Cargo Net will not properly hold
objects in case of sudden vehicle
braking or collision depending on
cargo weight. Heavy loads not
sufficiently fastened could exceed
net capacity and hit the vehicle
occupants, with the ensuing risk of
injury.
•
Before leaving for a trip, fasten all
objects that might move to trunk
floor, using the devices provided by
Maserati for this purpose.
3
137
Advertisement
Table of Contents
