Table of Contents
Advertisement
• If using the shift lever in M +/-
(Manual) mode, you can activate it by
moving the lever from D (Drive) to
the left and then forward towards
the "–" symbol or back towards the
"+" symbol and the gear is shifted.
• To exit P (Park) mode, or to pass from
N (Neutral) to D (Drive) or R (Reverse)
position when the car is stopped or
is moving at a low speed, the brake
pedal must also be pressed.
CAUTION!
•
DO NOT accelerate while shifting
from P (Park) or N (Neutral) to
another mode.
•
After selecting a transmission
mode, wait a few seconds before
accelerating. This precaution is
particularly important with a cold
engine.
Transmission Status on the Instrument
Cluster Display
By pressing the unlock button on
the lever, the gear change positions
field is displayed: if you release the
button without moving the lever, the
field disappears after 2 seconds. By
operating instead the lever, the new
range will be indicated in the field and
in the lower part of the display.
If the vehicle is in D (Drive) status,
in M +/- (Manual) or temporarily in
manual drive mode, the gear position
is indicated beside the lever status
("D" or "M"), on the lower part of the
display.
Service Shift Lever
In the event of a shift lever
malfunction, a message on the
instrument cluster will invite to stop
the car safety and turn off the engine.
In this way the system moves the
transmission in P (Park) position.
Driving
5
235
Advertisement
Table of Contents
