Table of Contents
Advertisement
Before Starting
and will then flash slowly until the
vehicle is disarmed.
2
Rearming the System
If something triggers the security
alarm, and no quick action is taken to
disarm it, the vehicle security alarm
will turn off the beeper after 29
seconds, and turn off all of the visual
signals after 31 more seconds; the
vehicle security alarm will then rearm
itself.
Arming the System
Follow these steps to arm the vehicle
security alarm.
1. Make sure the vehicle ignition
switch is OFF.
2. Perform one of the following
methods to lock the vehicle:
• Press the
lock button on the
interior power door lock switch
located on the driver door trim panel
20
with the driver and/or passenger
door open.
• Press the button on the exterior
"Passive Entry" door handle having a
valid key fob RKE transmitter in the
same exterior zone (see "Passive
Entry System" in this section for
further information).
• Press the
lock button on the key
fob RKE transmitter.
3. If any door is open, close it.
In any of these situations, if one or
more windows are open, they will
remain open. To close the windows
press again the
lock button and
hold it until their closure.
If vehicle is equipped with power
liftgate/Hands free, when arming the
alarm system in any of the described
ways, the liftgate will remain open if
Advertisement
Table of Contents
