Description; Intended Use - janitza UMG511 Installation And Commissioning Manual

Description

Intended use

The UMG511 is intended for the measurement
of voltage quality according to EN61000-4-
30 in the building installation, to distributors,
power switches and busbars.
Measurement voltages and measurement cur-
rents must come from the same network.
The UMG511 is suitable for installation in sta-
tionary and weather-protected control panels.
Conductive control panels must be earthed.
The UMG511 can be used in 2, 3 and 4 con-
ductor networks and in TN and TT networks.
The current mesaurement inputs of the
UMG511 are connected using external ../1A
or ../5A current converters.
Measurement in medium and high voltage
networks generally takes place through cur-
rent and voltage converters.
8
Description
The UMG511 can be used in residential and
industrial areas.
Measurement results can be displayed and
saved then read out and processed further by
serial interfaces.