Password - janitza UMG511 Installation And Commissioning Manual

Password

With the password, the user can block access
to the "settings". It is then only possible to
change the settings directly on the device by
entering the password.
A password (000000) is not programmed in
the factory.
The password consists of a 6 digit number
combination.
Setting range: 1-999999 = with password
000000 = without pass-
word
Password request
If the password protection is activated through
the allocation of a password, access to the
"settings" is then only possible with the pass-
word request.
• Press push button 6
• Enter the password with the arrow keys and
confirm with push button 6.
• You can then make the changes in the
menu under "settings".
• The password protection is then reactivat-
ed when leaving "settings".
Parameterisation
53