janitza UMG511 Installation And Commissioning Manual page 73

Declaration of conformity
The UMG511 fulfils the following protection requirements:
Directive 2004/108/EC in connection with DIN EN61326-1 (2006-10) as well as
directive 2006/95/EC in connection with EN 61010-1 (2002-08)
Device safety
Safety regulations for electrical measurement, control, regulation and laboratory devices
Protection class
EMC requirements
Fault transmission, residential area : DIN EN61326-1:2006-10, class A, IEC61326-2-1:2005
Interference immunity, industrial area: DIN EN61326-1:2006-10, table 2, IEC61326-2-1:2005
Housing
Supply voltage
Measurement inputs
RS485, Ethernet, digital inputs and outputs
Electrical measurement converter for the conversion of changing current levels in analogue or
digital signals
Appendix
: EN61010-1 08:2002, IEC 61010-1:2001
: I (device with circuit breaker)
: Electrostatic discharge, DIN EN61000-4-2,
IEC61000-4-2(4kV/8kV)
: Electromagnetic fields, IEC61000-4-3:2002 (10V/m)
: Electromagnetic fields, IEC61000-4-8:2000 (100A/m)
: voltage dips, IEC61000-4-11 (0.5Per.)
: Rapid transients, IEC61000-4-4 (2kV)
: Surge voltages, IEC61000-4-5 (1kV L against N)
: Cable fed HF signals, IEC61000-4-6 (3V)
: Surge voltages, IEC61000-4-5 (2kV)
: Cable fed HF signals, IEC61000-4-6 (3V)
: Rapid transients, IEC61000-4-4 (2kV)
: Cable fed HF signals, IEC61000-4-6 (3V)
: Rapid transients, IEC61000-4-4 (1kV)
: Surge voltages, IEC61000-4-5 (2kV)
: DIN EN 60688 April 2002
: IEC60688:1992 +A1:1997+ A2:2001
73