Goods-In Checks - janitza UMG511 Installation And Commissioning Manual

Goods-in check
The correct and safe operation of this device
requires appropriate transport, correct stor-
age, positioning and assembly as well as
careful operation and maintenance. If it can be
assumed that risk-free operation is no longer
possible, the device should be immediately
taken out of operation and secured against
being unintentionally being reinitialised.
Unpacking and packing should only be under-
taken with the usual care with the application
of force, while using suitable tools. The correct
mechanical condition of the devices should be
checked with visual tests. Please pay atten-
tion to the installation instructions included
with the device.
It can be assumed that risk-free operation is
no longer possible if, for example, the device:
• displays visible damages,
• does not work despite being connected to
the mains,
• has been subject to unfavourable conditions
(e.g. storage outside of the authorised climate
limits without adaptation to the climate, thaw-
ing etc.) or transport stresses (e.g. fall from a
height - even if there are no visible external
damages).
Please check the completeness of the deliv-
ery before beginning with installation of the
6
Goods-in check
device.
m
All of the screw clamps belonging to
the supplied device are already at-
tached.
m
The installation and commissioning
instructions also describe options
that are not part of the scope of sup-
ply.
m
All supplied options and versions are
described on the delivery note.