Table of Contents
Advertisement
Display
Define what information should appear on the top three (3) display lines
of the control unit. Choices include:
Percent oxygen (% O
Cell temperature
Cell millivolts
Thermocouple millivolts (T/C millivolts)
Current date/time
User text
Turn off (leave display line blank)
When you access menus, the menu options can occupy display lines 3
and 4, and sometimes display line 2. Therefore, place the information
that is most critical for you to view on the topmost display lines.
NOTE
Setting up the dIsplay
1.
From the Setup menu, select Display.
2.
Select Display Line #1, Display Line #2, or Display Line #3, de-
pending on where you want to place the information.
3.
Select the type of information you want to place on the display line.
Entering User Text
The Down arrow found on the third line of the display allows you to see
your current position when entering user text. When you first select the
User Text option, this Down arrow moves to above the first position.
To enter text, use the Up and Down arrow keys on the keypad to scroll
through the ASCII text characters. When the letter you want to enter ap-
pears in position, press the Right arrow key to move to the next position.
You can also press the Left arrow key to move back one position in your
text message. When you are finished entering your message, press Enter.
User text can be up to 20 characters long.
NOTE
)
2
Controller / User Interface | 4-5
Advertisement
Table of Contents
Troubleshooting
