Table of Contents
Advertisement
Alarm Key
Figure 4-4. Alarm Key menu.
NOTE
See the "Wiring" section in the Installation chapter for help on alarm con-
nections and how alarms are labeled on the control unit wiring card.
ALARM KEY
Alarms 1 and 2 are hard wired for the Watchdog Timer and Service
alarms and are not software-selectable.
Oxygen alarms are all disabled during a primary or regular calibra-
tion. In addition, alarms are disabled during start-up until the sensor
reaches its proper operating temperature.
Alarm Set Points
Alarm Configure
Relay Configure
Select Function
Exception Log
Controller / User Interface | 4-19
Advertisement
Table of Contents
Troubleshooting
