Ametek Thermox WDG Insitu User Manual page 157

CALIBRATE KEY
Menu Options
Initiate Cal/Initiate Verify
Cal/Verify Data
Cal Gas Values
Inject Cal Gas
Set Cal Timers
(applies only for auto cal operations with
RCU, except for setting time and date)
Table B-5. Calibrate Key menu.
CALIBRATE KEY
Set Cal Timers Submenu
Set Auto Timers
Set Time and Date
Auto Cal On/Off
Cal gas Duration
Recovery Duration
Table B-6. Calibrate Key/Set Cal Timers Submenu.
Functions/Options
Start an automatic, remote, or manual calibration
or verify
View latest calibration and verify data.
- Cal data
- Verify data
Enter calibration gas values.
Set pressure and flow to RCU gases without
performing a calibration.
Set control unit time/date.
Enable or disable auto cal cycles.
Set cal gas times for auto cal/verify operations.
Define recovery durations after a cal/verify.
Functions/Options
Auto Cal Cycle
Auto Verify Cycle
Set Time
Set Date
Auto Cal On/Off
Auto verify On/off
O2 Span gas Time
O2 Zero Gas Time
Enter Recovery Time
Menu Option Charts | B-3