Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize criti-
cal instructions as follows:
NOTE
Electrical Safety
Up to 5 kV may be present in the analyzer housings. Always shut down power
source(s) before performing maintenance or troubleshooting. Only a qualified
electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may
impair the safety protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specifications and safety pro-
tection are void if instrument is operated from an improperly grounded power
source.
An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.
An operating procedure which, if not strictly observed, may result in damage
to the equipment.
Important information that should not be overlooked.
Verify ground continuity of all equipment before applying power.
| vii