Setup Key - Ametek Thermox WDG Insitu User Manual

Setup Key

4-4 | Thermox Series 2000 WDG Insitu Analyzer
Display
Process
Pressure
System Tests
Sensor Config
Figure 4-2. Setup Key menu options.
SETUP KEY
Menu Options
Display Define what information to place on each display line.
Passwords Create a system password to limit control unit access.
Process Select a positive or negative process pressure.
Pressure Enter process pressure value.
System Tests Perform internal diagnostics on Series 2000.
System Serial #
View serial and manufacturing number for the control unit.
Primary Perform an automatic, remote, or manual primary calibra-
Calib tion
This is not a typical calibration. A primary calibration is intended to extend the
life of your sensor. Do not perform this type of calibration unless specifically
instructed to do so.
Sensor Config
Select the type of sensor you are using.
Communication Define Series 2000 communication parameters.
Setup Key
Password
System Serial #
Primary
Calibrate
Communication
Functions/Options