Ametek Thermox WDG Insitu User Manual page 146

5F/95
60/96
A-18 | Thermox Series 2000 WDG Insitu Analyzer
Which gas is currently flowing to the
Gas_ctr
sensor
0 – span gas flowing
1 – zero gas flowing
2 – combustible span gas
3 – methane span gas (if 3 span value RCU
installed)
4 – Step func. Process gas flowing (1
time)
5 – Step func. Span gas flowing
6 – Step func. Zero gas flowing
7 – Step func. Process gas flowing (2
time)
0x80 – User Aborted Cal (set from abort to
recovery completed)
0x81 – Recovery Period (if in a cal or
verify) per loc 60/95.
cal or verify) per loc 60/95.
Which type of calibration the unit is in:
Calflag
0 – In normal calibration
1 – In verify
2 – In primary cal
3 – In none of the above, normal operation
IQ
S2
- Normal operation
– Normal operation (if not in a
Read only
st
nd
Read only