Differential Temperature; O2 Air - TESTO 330 Instruction Manual

Pos: 68 /TD/Produkt verwenden/testo 330/testo 330 Diff_Temperaturmessung @ 6\mod_1279181201625_7011.doc @ 66249 @
6.2.8.

Differential temperature

✓ The differential temperature set (0554 1204) must be
connected.
Calling up the function:
> [
[OK].
Performing the measurement:
1. Start measurement:
- The meas. views and the calculated differential temperature (T1
T2) are displayed.
2. Quit measurement:
Options:
> [Options]
> [Options]
> [Options]
form of a line graph.
> [Options]
during a measurement): The measurement view menu is
opened.
Pos: 69 /TD/Produkt verwenden/testo 330/testo 330 Zuluft @ 6\mod_1279183710311_7011.doc @ 66281 @
6.2.9.

O2 air

✓ An O2 dual wall clearance probe (0632 1260) must be
connected.
Calling up the function:
> [
Performing the measurement:
1. Start measurement:
- The meas. view is displayed.
2. Quit measurement:
] → Measurements
[
[
→ Clipboard: Data are saved to the clipboard:
→ Save: The meas. views are saved in a protocol.
→ Show Graphic: The meas. views are displayed in
→ Readings
] → Measurements
[
[
→ [OK] → Differential
].
].
Display: (This function is not available
→ [OK] → O2add→ [OK].
].
].
6 Using the product
Temperature→
51