5 First steps
Pos: 37 /TD/Erste Schritte/testo 330/testo 330 Produkt kennenlernen Basisfunktionen (LV-spezifisch) @ 6\mod_1278935326903_7011.doc @ 65322 @
5.2.3.
Switching on
> press
-
The start screen is displayed (duration: about 5 s).
-
If the voltage supply was interrupted for a longer period: The
menu Date / Time is opened.
-
The pressure sensors are set to zero.
-
There is an Error Service: The
-
The menu
5.2.4.
Calling up a function
1. Select function: [▲], [▼].
-
The chosen function appears in a frame.
2. Confirm selection: [OK].
-
The chosen function is opened.
5.2.5.
Entering data
Some functions require data (numbers, units, characters) to be
entered. Depending on the function that is chosen, the data are
entered via either a list field or an input editor.
List field
1. Select the value to be changed (numerical value, unit): [▲],
[▼], [◄],
2. Press
3. Set value: [▲], [▼], [◄],
function).
4. Confirm the entry: [OK].
26
[
]
.
Measurements
[►]
(depending on the selected function).
[Edit]
.
Error Diagnosis
is displayed.
[►]
(depending on the selected
is displayed.