Cleaning The Modular Flue Gas Probe; Replacing The Probe Module - TESTO 330 Instruction Manual

7.5.

Cleaning the modular flue gas probe

✓ Disconnect the flue gas probe from the measuring instrument
prior to cleaning.
1. Release the probe catch by pressing the key on the probe
handle and remove the probe module.
2. Blow compressed air through the flue gas ducts in probe
module and probe handle (see illustration). Do not use a brush!
3. Fit a new probe module on the handle and engage in place.
Pos: 83 /TD/Produkt instand halten/testo 330/testo 330 Sondenmodul wechseln @ 6\mod_1279263131873_7011.doc @ 66829 @
7.6.

Replacing the probe module

✓ Disconnect the flue gas probe from the measuring instrument
prior to cleaning.
1. Press the key on the top of the probe handle and remove the
probe module.
2. Plug in the new probe module and engage it in place.
Pos: 84 /TD/Produkt instand halten/testo 350 neu/testo 350_Instandhaltung Thermoelement wechseln @ 6\mod_1270039469873_7011.doc @ 60751 @
7 Maintaining the product
63