Alarm Thresholds; Units - TESTO 330 Instruction Manual

Options:
> [Options]
measuring values per display page.
> [Options]
the selected line.
> [Options]
> [Options]
factory setting
Pos: 47 /TD/Produkt verwenden/testo 330/testo 330 Alarschwellen @ 6\mod_1279021018511_7011.doc @ 65512 @
6.1.2.2.

Alarm thresholds

Alarm thresholds can be set for several display parameters. An
audible alarm signal is triggered when the alarm limit is reached.
Calling up the function:
> [
Switching alarm signals on / off, changing alarm thresholds:
1. Select function or data: [▲],
2. Set parameter: [▲],
3. Save changes: [Finished].
Pos: 48 /TD/Produkt verwenden/testo 330/testo 330 Einheiten @ 6\mod_1279022297845_7011.doc @ 65543 @
6.1.2.3.

Units

The units used for parameters in configuration menus can be set.
Calling up the function:
> [
Adjustable units
Parameter
Length
Pressure
1. Select the line: [▲],
2. Select the unit to be edited: [▲],
3. Confirm the entry: [Finished].
Pos: 49 /TD/Produkt verwenden/testo 330/testo 330 Datum_Uhrzeit @ 6\mod_1279023342203_7011.doc @ 65575 @
→ Number of
→ Insert Blank
→ Delete
→ Factory
] → Device Settings
[▼]
] → Device Settings
Unit
m,
mbar,
[▼]
Lines: Change the number of
Lines: Insert the blank line before
Line: Delete the selected line.
Setting: Reset the measurement view to
→ [OK] → Alarm
[▼] → [Edit].
and partly [◄],
→ [OK] → Units
ft
hPa
→ [Edit].
[▼] → [OK].
6 Using the product
Thresholds→
[►] → [OK].
→ [OK]
35
[OK]