Pretest - TESTO 330 Instruction Manual

6 Using the product
6. Start measurement:
- The stability time will run. After this the measuring phase starts
automatically.
> End stability time and measurement early: [Next].
- The readings and
measurement has been completed.
7. [Edit]
6.2.15.3.

Pretest

> Insert the connector plug of the pressure test kit (0554 1213)
onto the flue gas socket and lock by slightly turning it clockwise
(bayonet lock).
Performing the measurement:
✓ The pressure socket of the instrument must be free (i.e.
unpressurized, not closed).
1. Pretest
- Pressure zeroing.
2. Select parameter: [▲],
3. Set parameters or enter data: [▲],
[OK].
4. Pressurize the system.
5. Start measurement:
- The stability time will run. After this the measuring phase starts
automatically.
> End stability time and measurement early: [Next].
- The readings and
measurement has been completed.
6. [Edit]
58
[
Result Let By Test
→ Select test result: [▲],
→ [OK].
[▼]
[
Result Pretest
→ Select test result: [▲],
].
are displayed when
[▼] → [OK].
→ [Edit].
[▼] and partly [◄], [►]→
].
are displayed when
[▼] → [OK].