Co Ambient - TESTO 330 Instruction Manual

Options:
> [Options]
> [Options]
> [Options]
(kg/h > gal/h
Pos: 72 /TD/Produkt verwenden/testo 330/testo 330 CO-Umgebung @ 6\mod_1279194419538_7011.doc @ 66409 @
6.2.12.

CO ambient

✓ An ambient CO probe (recommended) or a flue gas probe must
be connected.
Calling up the function:
> [
Performing the measurement:
1. Start measurement:
- The measurement starts and the meas. view is displayed
graphically (trend display).
- An audible alarm signal is triggered when the alarm limit is
reached.
2. Quit measurement:
3. Confirm the message: [OK].
Options:
> [Options]
> [Options]
> [Options]
→ Clipboard: Data are saved to the clipboard:
→ Save: The meas. views are saved in a protocol.
→ Edit Unit: The unit for the oil flow can be changed
or gal/h >
Cigarette smoke influences the measurement by more than
50 ppm. The breath of a smoker influences the
measurement by about 5 ppm.
When using an ambient CO probe, note that:
The direction of flow of the gas has an effect on the
accuracy of measurement. Frontal flow onto the probe
leads to higher meas. views. The best measurement results
are achieved when the probe is moved gently backwards
and forwards.
When using the ambient CO probe and the flue gas probe,
note that:
The probe must be in the open air (CO-free) during the
zeroing phase!
] → Measurements
[
[
→ Clipboard: Data are saved to the clipboard:
→ Save: The meas. views are saved in a protocol.
→ A-Thresh.: The alarm thresholds menu is opened.
kg/h).
→ [OK] → CO Ambient
].
].
6 Using the product
→ [OK].
53