AT&T 7400B Plus User Manual page 96

CHAPTER 4: PC APPLICATIONS
Page 4-44
PRINTER:
Serial Protocol:
Remove Extra Line Feeds:
SMARTMODEM :
Pause Time For Comma:
Touch-Tone Timing:
Wait For Dial Tone:
Wait For Carrier Signal:
Recognize Carrier Signal:
Carrier Loss To Hangup Time:
Telephone Jack Type:
SPECIAL VALUES : Transet 1000 Port:
Direct-Connect Port:
Available Disk Drives:
Monitor and Adapter:
SCREEN HUES : Character Foreground:
Reverse-Video Foreground:
Highlight Foreground:
Figure 37 Smartcom II - Configuration Menu
Set the Dial Method option to "TONE" and the Port and Direct
4
Connect Port option to either "COM 1" or "COM 2" (The port to
which the 7400B Plus is connected).
After the options are set, press the down arrow until
5
"Record to Disk? (Y/N ):" appears on the bottom of the
screen.
Save the new set of options.
6
DEFINITY Communications System
CONFIGURATION
Port: PARALLEL
NO
Port: COM1:
2 ( 0-255 seconds )
70 ( 50-255 0.001 seconds )
2 ( 2-255 seconds )
30 ( 1-255 seconds )
6 ( 1-255 0.1 seconds )
7 ( 1-254 0.1 seconds )
Speaker Status: ON UNTIL CARRIER - MED
RJ11
NONE
COM1:
Default Set: Z
AC
COLOR/GRAPH. DISP. ADAPTER/COLOR MONITOR
Log-on Message: Smartcom II - IBM Personal Computer
WHITE
LT BLUE
LT RED
7400B Plus Data Module
User´s Guide
Press F2 For Help
Baud:
Add NULs: 0
Dial Method: TONE
Background: BLUE
Background: LT GRAY
Background: BLUE