AT&T 7400B Plus User Manual page 144

APPENDIX A: AT COMMAND SET
Page A-13
Command:
Function:
Type:
Arguments:
S-Register:
Example:
Comments:
See Also:
X
Control the extended result code.
configuration
The command accepts one of 5 arguments as follows:
0 - The basic result code set (0—4) is enabled. No busy code sent
when line is busy. No speed indication with connect code.
1 - Result codes 0—5, 10—12, and 14 are enabled. No busy code
sent when line is busy. Speed indication with connect code.
2 - Result codes 0—5, 10—12, and 14 are enabled. No busy code
sent when line is busy. Speed indication with connect code.
3 - Result codes 0—5, 7, 10—12, and 14 are enabled. Busy code
sent when line is busy. Speed indication with connect code.
4 - Result codes 0—5, 7, 10—12, and 14 are enabled. Busy code
sent when line is busy. Speed indication with connect code.
Bits 4, 5, and 6 of S22 are set according to the argument given
with the command.
atx2 ( )
Enter
In the example, the results described under argument value 2 are
implemented. Regardless of which argument is used, the data
module will wait until the call is completed, or the time set in
register S7 expires. All arguments do change the appropriate
bits in S22 and affect the result codes returned.
Chapter 3, "Configuration and Operation"; result codes in
Appendix E, "Summary Tables;" the Q and V commands in this
appendix.
DEFINITY Communications System
7400B Plus Data Module
User´s Guide