AT&T 7400B Plus User Manual page 116

CHAPTER 4: PC APPLICATIONS
Page 4-64
Setting Up a Call
Disconnecting a Call
Select the "Softkey Definitions" option from the Setup Mode
1
menu.
Note: The initialization and dial strings can be setup up either on
the same softkey or separate ones.
The initialization command string for the 7400B Plus is:
at &f &c1 &d2 e1 v1<ENTER>.
The dial string is: "atdt + 9,18006245123<ENTER>" for
ATTMAIL. If the two strings are going to be combined in the
same softkey, the "at" part of the dial string should not be
included. Combined together the string should look like this:
"at &f &c1 &d2 e1 v1
dt9,18006245123<ENTER> "
After defining the softkey(s), select "Alt s" to exit the Setup
2
Mode.
Select "Y" to save the current settings (SMARTERM 240 will
3
return to the main menu screen).
Select the number for the configuration that you want to
4
dial.
Press the previously selected Softkey(s) which will initialize
5
the 7400B Plus and dial the call respectively.
Wait for a "CONNECT" message.
6
Once the call is established, press < ENTER> to get the
7
ATTMAIL login prompt.
Type in: +++ , wait for an "OK" from the 7400B Plus.
1
Type in: ath<ENTER> (the 7400B Plus will disconnect from the
2
other computer).
Select "Alt s" to return to SMARTERM 240 or select "Alt x" to
3
exit to DOS.
DEFINITY Communications System
7400B Plus Data Module
User´s Guide