AT&T 7400B Plus User Manual page 86

CHAPTER 4: PC APPLICATIONS
Page 4-34
Check that the messages shown on the screen match those in the above figure. It is likely
1
that you will have to add messages for options D, E, and F. The connect message in option F
should read, "Connect 1920" to work correctly at 19.2 kbps.
Press < ESC> twice to return the Main menu of the Procomm Plus Setup Utility.
2
Select "Save Setup Options" and press < ENTER>.
3
Press the < ESC> key to return to the Terminal Mode Screen.
4
Press "Alt-x" to exit from Procomm Plus.
5
(It is necessary to exit and restart Procomm Plus to properly configure the 7400B Plus.)
Select "Y" to exit Procomm Plus and return to DOS.
6
Type "pcplus" at the DOS prompt to restart Procomm Plus.
7
PROCOMM Plus SETUP UTILITY
A - 300 baud connect message ...... CONNECT
B - 1200 baud connect message ..... CONNECT 1200
C - 2400 baud connect message ..... CONNECT 2400
D - 4800 baud connect message ..... CONNECT 4800
E - 9600 baud connect message ..... CONNECT 9600
F - 19200 baud connect message .... CONNECT 19200
G - No connect message 1 .......... NO CARRIER
H - No connect message 2 .......... BUSY
I - No connect message 3 .......... NO DIALTONE
J - No connect message 4 .......... ERROR
Alt-Z: Help | Press the letter of the option to change: | Esc: Exit
Figure 29 Procomm Plus - Modem Result Messages
DEFINITY Communications System
7400B Plus Data Module
MODEM RESULT MESSAGES
User´s Guide