AT&T 7400B Plus User Manual page 66

CHAPTER 4: PC APPLICATIONS
Page 4-14
Disconnecting a Call
Select the "Device Setup" option.
5
=Modem device driver setup for session ATTMAIL========================
Port: 1
Local: off
DialPrefix: ATDT-------------
AnswerSetup: ATV1SO=1| -------
Figure 11 Crosstalk Mk.4 - Modem Device Driver Setup
Set the following parameters for ATTMAIL:
6
Set the "Port Number" to which the 7400B Plus is
a
connected.
Set the "Speed" to "2400."
b
Set the "Databits" to "8."
c
Set the "Parity" to "None."
d
Set the "Stopbits" to "1."
e
Press < ENTER> to move the cursor through the other fields on
7
the screen until the previous menu appears.
(OPTION) - This entry can be saved by selecting the "Save in
8
Phone Book" option.
Select the "Call" option (Crosstalk will dial ATTMAIL).
9
Once the call is established, press < ENTER> to get the
10
ATTMAIL login prompt.
Press "Alt F10" to display the Online menu.
1
Select the "Disconnect from this session" option.
2
Select the "Disconnect (Hangup)" option.
3
Place another call or select the "Quit Crosstalk" option to
4
return to DOS.
DEFINITY Communications System
Speed: 2400 bps DataBits: 8
Flow: rts/cts
communications port to use
7400B Plus Data Module
User´s Guide
Parity: none StopBits: 1
Breaklength: 200 ms
DialSuffix: |--------
ModemInit: | ATV1EOX4| ---