Related Documentation - AT&T 7400B Plus User Manual

PREFACE: ABOUT THIS GUIDE
Page vi
RELATED
DOCUMENTATION
Chapter 4: PC Applications. Contains notes on how to
configure some popular voice and data PC communications
packages for use with the 7400B Plus.
Chapter 5: Troubleshooting. Describes procedures for
troubleshooting problems that may be encountered while
configuring and operating the 7400B Plus.
Appendix A: AT Command Set. Contains an explanation of
each AT command accepted by the 7400B Plus.
Appendix B: Dial Modifiers. Contains an explanation of
each Dial Modifier accepted by the 7400B Plus.
Appendix C: S-Registers. Contains an explanation of each
S-register used by the 7400B Plus.
Appendix D: Loopback Data Tests. Provides information on
how to perform loopback tests and how to isolate problems
using the 7400B Plus.
Appendix E: Quick-Reference Summaries. Contains quick-
reference summaries of AT commands, S-registers, result
codes, factory-default configuration settings, EIA-232-D
connector
pin-outs, ASCII character set.
A glossary and an index are provided at the rear of this guide.
The following is a list of other manuals that may provide helpful
information while installing and using the 7400B Plus. Since each
user may have different equipment and software preferences or
availability, only generic titles are given for the manuals.
If you are using a terminal device other than a PC:
User's guide for your terminal device. You may need
information about the configuration and capabilities of your
terminal device from this manual during the installation and
preliminary operation of the 7400B Plus.
If you are using a PC as your terminal:
User's guide for Microsoft MS-DOS . You may need this
reference for explanations of commands used by your PC to
install, configure, and run your PC communications package.
User's guide for your PC communications package. You may
need this guide for information on how to configure your
terminal emulation software to access the 7400B Plus.
DEFINITY Communications System
7400B Plus Data Module
User´s Guide