AT&T 7400B Plus User Manual page 151

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Command:
Function:
Type:
Arguments:
S-Register:
Example:
Comments:
See Also:
Command:
Function:
Type:
Arguments:
S-Register:
Example:
Comments:
See Also:
&W
Store the active configuration profile.
immediate
No argument or an argument of 0 stores to location 0, an
argument of 1 stores to location 1.
none
at&w0 ( )
Enter
In the example, the currently active configuration profile is
stored to memory location 0. Only a subset of the configuration
parameters are actually stored.
Chapter 3, "Configuration and Operation"; Appendix C, "S-
Registers."
&Y
Designate the default configuration profile.
configuration
An argument of 0 will recall stored profile 0; an argument of 1
will recall stored profile 1. Factory-default selection is stored
profile 0.
none
at&y1 ( )
Enter
In the example, the configuration profile stored in location 1 will
be recalled the next time that the 7400B Plus is powered on.
When the &Y command is issued, the currently active profile
does not change until the 7400B Plus is powered off and then on
again.
Chapter 3, "Configuration and Operation."
APPENDIX A: AT COMMAND SET
Page A-20