Hyperaccess - V3.32 - AT&T 7400B Plus User Manual

DEFINITY Communications System
7400B Plus Data Module
User´s Guide

HYPERACCESS - V3.32

7400B Plus
Configuring the Software
HyperACCESS is a data communications software package
produced by Hilgraeve, Inc.
The 7400B Plus is setup through the HyperACCESS Call Setup
system.
Change to the HyperACCESS directory.
1
To begin HyperACCESS type "ha" at the DOS prompt.
2
(The title screen appears for a few seconds, followed by the Main
menu screen.)
---------------------------HyperACCESS---------------------------
Main Menu
Press F1-F6 for option or F10 for communications screen
F1 Call
F2 Answer
F3 Files
F4 Use DOS
F5 Setup
F6 Quit
Save file
file name = none
file size =
Send file
file name = none
file size =
Figure 17 HyperACCESS - Main menu
At the Main menu screen select "F1" to get the Call menu.
3
CHAPTER 4: PC APPLICATIONS
Setup = Call
-- Place calls or be a direct-cabled terminal
-- Answer calls or be a direct-cabled host
-- Set up files for saving or sending data
-- Use DOS commands or other software
-- Set communications / program options
-- Exit from HyperACCESS
Copyright 1987 Hilgraeve Inc.
Page 4-19
Revision 3.32
Serial No. 131655