AT&T 7400B Plus User Manual page 115

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Set the "Communication Line" to the port which the 7400B Plus is connected.
a
Set the Baud Rate to "2400."
b
Set the Bits/Parity option to "8/none."
c
Set the Stop Bits option to "1."
d
Once in the setup mode, select the "Configuration Name"
5
option.
Enter "ATTMAIL" as the configuration name and press
6
< ENTER> .
Select the "Terminal Mode" option.
7
Select the type of terminal emulation needed and press
8
< ENTER>.
Select the "Communications Parameters" option.
9
=Setup mode===========================================================
My favori Communications parameters
Configura
Terminal
Communica
Printer a
Keyboard
National
Softkey d
File tran
DEC termi
Tektronix
Quit setu
Back to D
Defines t
=Keyboard Usage==============================================================
| | : selects option
| Exc: cancels
| Alt-S: exits Setup
| Alt-X: exits SmarTerm
============================================================================|
Figure 53 Smarterm 240 - Communication Parameters
After the communications parameters are set, press < ESC>
10
to return to the Setup Mode menu.
Communication line
Baud rate
Maximum transmit rate
Bits/parity
Stop bits
Auto XON/XOFF threshold
Disconnect modem when exiting
Disconnect duration
Display parity error
Display overrun error
On-line/local
Local echo
Selects the communication line (port).
: moves cursor, up/down
Home,End: moves cursor,first/lat option |
Keypad +: adds to My Favorite Param
CHAPTER 4: PC APPLICATIONS
Page 4-63
Com port 1
2400
Unlimited
8/none
1 bit
64 chars
Yes
2 sec
Yes
Yes
On-line
Disable
|
|
|