AT&T 7400B Plus User Manual page 163

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Register:
Description:
Range of
Values:
Storable:
Comments:
See Also:
Register:
Description:
Range of
Values:
Storable:
Comments:
See Also:
S6
This S-register controls the blind dial delay interval for voice dial
calls.
Value may be 000 through 255 seconds; factory-default is 2
seconds.
no
The 7400B Plus uses the blind dialing method to originate voice
calls since it does not contain a dial tone detector. When an
offhook message is sent to the PBX, the 7400B Plus pauses for the
specified time before dialing the call.
S7
Wait time for connection to remote endpoint. If the data mode is
not entered within this time, the call will be disconnected.
Value may be 001 through 255 seconds; factory-default value is
060 seconds.
yes
Even though S7 is storable, it is not displayed with the stored
profile data generated by the at&V command.
Chapter 3, "Configuration and Operation."
APPENDIX C: S-REGISTERS
Page C-7