Carbon Copy Plus - V - AT&T 7400B Plus User Manual

DEFINITY Communications System
7400B Plus Data Module
User´s Guide

CARBON COPY PLUS - V

5.1
7400B Plus
Installation Procedure
CARBON COPY Plus is a data communications software package
produced by MicroCom.
The 7400B Plus is configured in the CARBON COPY Plus
installation procedure.
Change to the CARBON COPY Plus directory.
1
At the DOS prompt, type in "ccinstall."
2
435.if 0>0 .nr 38 0/1
========
GENERAL PARAMETERS
A -- Comm Port Address.....COM1
B -- Baud Rate.............2400
C -- Modem Type............Hayes V-Series
D -- Keyboard handling.....USA Keyboard
E -- Display TYpe..........Color
F -- Menu Colors...........White on Blue
G -- Working Directory.....C:
H -- Menu Level Options....Advanced
1 -- CC Optional Configuration Parameters
2 -- CCHELP Optional Configuration Parameters
c -- Call Table
4 -- Password Table
Figure 1 CARBON COPY Plus - System Parameters
Change the value of the following options by pressing the
3
letter listed next to it. For example, to change the "Comm
Port Address" for COM 1 press "A" until COM 1 appears.
Set the Communication Port Address to which the
a
7400B Plus is connected (typically COM 1).
Set the default Baud Rate (300, 1200, 2400,etc.).
b
Depending on the version of CARBON COPY Plus you
c
are using, select the following for the Modem type:
For versions prior to 5.1, choose "Hayes
Compatible."
For version 5.1, choose "Hayes V" series.
CHAPTER 4: PC APPLICATIONS
CARBON COPY Plus System Parameters (5.1)
EXIT OPTIONS
Q -- Quit, changes not saved
X -- eXit, changes saved
MENU LIST
Type letter for selection:
Page 4-3
=======