AT&T 7400B Plus User Manual page 76

CHAPTER 4: PC APPLICATIONS
Page 4-24
(Set the Protocol Settings for ATTMAIL to match those in the figure above.)
Changing the default protocol.
Select "F2" to set the communication parameters.
1
----------------------------------HyperACCESS------------------------
Protocol
--------
Press F1-F7 for option, F9 for previous menu, or F10 for comm screen
F1 Baud rate (50 to 57600)
F2 Data bits (not counting parity & stop bits)
F3 Stop bits (1 or 2)
F4 Parity type (None, Odd, Even, Mark, Space)
F5 Duplex (Half or Full)
F6 Echo received characters to sender
F7 Break a signal duration (msecs.)
Received errors
framing = 0
overrun = 0
parity = 0
Figure 22 HyperACCESS - Protocol menu
Select "F9" to return to the Setup menu.
2
Select "F1" for the Store/Recall function.
3
Select "F1" to store the protocol setup.
4
Type in the setup name for the protocol to be saved under
5
(ATTMAIL).
Select "Y" to replace the existing Setup.
6
Select "F9" to return to the Setup menu.
7
Select "F9" to return to the Main menu.
8
DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Setup = Call (modified)
: 2400
: 8
: 1
: None
: Full
: No
: 750