AT&T 7400B Plus User Manual page 111

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Example Setup: (For example purposes, a call to ATTMAIL will be used for the setup.)
Set the "Connect Through Port" option to the port which the 7400B Plus is connected.
a
Set the "Type of Connection" option to "Direct Connection."
b
Set the baud rate to "2400" for ATTMAIL.
c
Set the "Character Format" to "8 - None - 1" for ATTMAIL.
d
Select "S" for the "Major Settings."
6
+------------------------Modify Connection: 7400B Plus------------------------+
| Major Settings
|
| Modem Settings
|
| V-series Settings
|
| X.25 Parameter List
|
| Flow-control Settings [V] |
|
|
|
|
|
|
|
+-----------------------------------------------------------------------------+
F1: Help | F2: Main Menu Functions | F5: Switch | F8: Save & Exit
Figure 50 Smartcom III - Modify Connection menu
Select "F8" to save and exit.
7
Press < ESC> to return to the Main menu.
8
CHAPTER 4: PC APPLICATIONS
Smartcom III
[S] | Connect through port:
|
[M] | Type of connection:
|
[V] | Phone number:
|
[X] | Transmission speed (baud):
| Character format:
| Protocol Settings
|
| Flow-control protocol: Start/Stop
|
|
|
|
Page 4-59
COM1 |
|
Direct connection |
|
|
|
2400 |
8 - None - 1 |
|
|
|
|
|
|
|
|
...Alt-Tab