AT&T 7400B Plus User Manual page 155

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Dial Modifier:
Function:
S-Register:
Example:
Comments:
See Also:
Dial Modifier:
Function:
S-Register:
Example:
Comments:
See Also:
T
Request to make a data call.
none
atdt918006230718 (
The purpose of the T dial modifier is to signal the 7400B Plus to
dial the number that follows as a data call. When entered
immediately after the D in a dial command and/or as the first
character in a stored number, the 7400B Plus will place a data
call. When the T is omitted, the 7400B Plus will still place a data
call.
Chapter 3, "Configuration and Operation."
, (comma)
Used as the pause character for voice calls.
S8
atd p 9,1,8005551212
The comma causes the 7400B Plus to delay dialing. On voice
calls, the pause time is stored in the S8 register. Dialing is not
delayed when the stored value is zero. On data calls, the comma
(,) is passed to the PBX which will delay dialing by the parameter
set in administration.
Chapter 3, "Configuration and Operation."
APPENDIX B: DIAL MODIFIERS
)
Enter
Page B-3