AT&T 7400B Plus User Manual page 61

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
Disconnecting a Call
Select the letter next to ATTMAIL. If it's not listed select
3
"O" for "Other service not listed above."
If ATTMAIL is a listed service:
Enter "9,18006245123" as the telephone number for ATTMAIL.
1
Enter "2400" as the Baud Rate.
2
If you want to be automatically logged in each time you are
3
connected to ATTMAIL, enter your account name and
password at the prompts, respectively.
If you don't want to be automatically logged into ATTMAIL,
4
press < ENTER> at both the account name and password
prompts, respectively.
Enter "Y" when asked to make the call.
5
Once the call is established, press < ENTER> to get the
6
ATTMAIL login prompt.
If ATTMAIL is not a listed service:
Enter "9,18006245123" as the telephone number for ATTMAIL.
1
Enter "ATTMAIL" as the system name you are calling.
2
Enter "2400" as the Baud Rate.
3
Enter "Y" to save this setup for future use.
4
Enter "ATTMAIL" as the filename for this setup.
5
Enter "Y" when asked to make the call.
6
Press < ENTER> (CROSSTALK dials the computer and waits
7
for the connection).
Once the call is established, press < ENTER> to get the
8
ATTMAIL login prompt.
Press the < ESC> key.
1
Enter "bye" at the "Command?" and press < ENTER> line to
2
disconnect from the other computer.
Enter "quit" at the "Command?" line and press < ENTER> to
3
exit CROSSTALK and return to DOS.
CHAPTER 4: PC APPLICATIONS
Page 4-9