AT&T 7400B Plus User Manual page 107

DEFINITY Communications System
7400B Plus Data Module
User´s Guide
SMARTCOM II - V 3.1
(MACINTOSH)
7400B Plus
Configuring the Software
SMARTCOM II is a data communication software package
produced by Hayes Microcomputer Products, Inc. The following
procedure is based on V 3.1 for use with Macintosh PCs.
The 7400B Plus is set up through Smartcom II's Direct Mode.
To configure the software do the following:
Change to the "SMARTCOM II" directory.
1
Select the "SMARTCOM II" icon from the file menu.
2
Select "Settings" from the Main communications menu.
3
Choose "Speed & Format..." from the Settings menu.
4
Set the appropriate options on the Speed & Format screen.
5
Transmission speed (baud): "2400"
a
Bits per character: "Eight"
b
Stop bits: "One"
c
Parity: "None"
d
After all the options are set, click "OK" to save the new set of
6
options and to return to the Main communications screen.
+ --------------------------------------------------------------+
| File Edit
+ --------------------------------------------------------------+
===========================================================
|| Speed & Format
|| Transmission speed (baud):
|| 110 300
|| 7200 9600
||
|| Bits per character:
|| Seven Eight
||
|| Parity:
|| Even Odd
||
|| ( OK
===========================================================
Figure 47 Smartcom II - Speed & Format screen
CHAPTER 4: PC APPLICATIONS
Connection Settings Autopilot
| Answer Message...
| Speed & Format...
| Modem...
| Terminal...
| Autotype Protocol...
| File Transfer Protocol... |
+---------------------------+
| Preferences...
+---------------------------+
600 1200 2400
19200 38400 Maximum
Stop bits:
One Two
Mark Space None
) ( CANCEL )
Page 4-55
Special |
|
|
|
|
|
|
||
||
4800 ||
||
||
||
||
||
||
||
||
||