Setup Warnings - GE LOGIQ S8 Service Manual

GE H
EALTHCARE
D 5394227, 12
IRECTION
3-2-2

Setup warnings

WHEN USING ANY TEST INSTRUMENT THAT IS CAPABLE OF OPENING THE
DANGER
AC GROUND LINE (I.E., METER'S GROUND SWITCH IS OPEN), DON'T
TOUCH THE UNIT!
DO NOT PULL OR LIFT THE SYSTEM WITH THE FRONT HANDLE OF THE USER
WARNING WARNING
INTERFACE (OPERATOR PANEL).
THE SYSTEM SHOULD NOT BE MOVED WITH THE OPERATOR CONTROL PANEL
WARNING WARNING
EXTENDED. MOVE THE OPERATOR CONTROL PANEL TO IT'S CENTERED AND
!! WARNING: LOCKED POSITION. REFER TO
Repair Parts" on page
TO PREVENT ELECTRICAL SHOCK, CONNECT THE UNIT TO A PROPERLY GROUNDED
CAUTION
POWER OUTLET. DO NOT USE A THREE TO TWO PRONG ADAPTER. THIS DEFEATS
!! CAUTION:
SAFETY GROUNDING.
DO NOT WEAR THE ESD WRIST STRAP WHEN YOU WORK ON LIVE CIRCUITS AND MORE
CAUTION
THAN 30 V PEAK IS PRESENT.
!! CAUTION:
DO NOT OPERATE THIS ULTRASOUND SYSTEM UNLESS ALL BOARD COVERS AND
CAUTION
FRAME PANELS ARE SECURELY IN PLACE. SYSTEM PERFORMANCE AND COOLING
!! CAUTION: REQUIRE THIS.
(When covers are removed, EMI may be present).
OPERATOR MANUAL(S)
CAUTION
THE USER MANUAL(S) SHOULD BE FULLY READ AND UNDERSTOOD BEFORE
OPERATING THE LOGIQ S8/LOGIQ E8 AND KEPT NEAR THE UNIT FOR QUICK
REFERENCE.
ACOUSTIC OUTPUT HAZARD
CAUTION
ALTHOUGH THE ULTRASOUND ENERGY TRANSMITTED FROM THE LOGIQ S8 PROBE IS
WITHIN AIUM/NEMA STANDARDS, AVOID UNNECESSARY EXPOSURE. ULTRASOUND
ENERGY CAN PRODUCE HEAT AND MECHANICAL DAMAGE.
• The system weighs approximately 85 kg (LOGIQ S8) / 97 kg (LOGIQ E8) without peripherals, two
people are required to unpack it.
• There are no operator serviceable components. To prevent shock, do not remove any covers or
panels. Should problems or malfunctions occur, unplug the power cord. Only qualified service
personnel should carry out servicing and troubleshooting.
PROPRIETARY TO GE
Section 8-2-3 "Returning/Shipping Probes and
8-4.
Section 3-2 - Setup reminders
LOGIQ S8/LOGIQ E8 S M
ERVICE ANUAL
3 - 3