GE LOGIQ S8 Service Manual page 327

GE H
EALTHCARE
D 5394227, 12
IRECTION
Data Transfer
Data Transfer provides a way to do the following:
• View information about past transfers of (APM) information.
• Set up automatic/scheduled transfer of allowed data files from the LOGIQ™ S8 to the server.
• Manually transfer data files allowed data files from the LOGIQ™ S8 to the server.
The information on Data Transfer is available to all service class licenses.
To access Data Transfer, select Utility (second page) > Service > Utilities > Data Transfer.
Figure 7-54 Data Transfer
This table shows all the elements available on Data Transfer with descriptions.
Table 7-8
Type of Upload
Upload Permission
Last Upload Status
Last Upload Attempt
Last Successful Upload
Scheduler
Save Settings
Send All
Data Transfer
Element
Type of log file. For example, Incremental Logs or Full Logs. Monitoring Logs,
System Logs, and Windows Logs are incrementally transferred when automatic
transfer is enabled. To enable automatic transfer, navigate to System Admin and,
under Service, check Enable Automatic Request for Service.
Whether the permission to upload the log file is allowed or not.
Whether the last log file upload was successful or not.
Date and time the last log file upload was attempted.
Date and time the last log file was successfully uploaded.
When selected, enables the related day selections. For example, All Days,
Monday, and Tuesday.
Saves the information.
Manually send the selected log files to the server.
Section 7-6 - Service Desktop (R4.2.5x and later)
LOGIQ S8/LOGIQ E8 S
Description
M
ERVICE ANUAL
7 - 57